dm1 Posted June 15, 2019 Report Share Posted June 15, 2019 I've bought a TY250 Mono. I took the engine out to paint it, but now the clutch lever arm is not pushing the pushrod to activate the clutch. I can remove the lever arm and see its a cam profile. There is marking where it pushes the rod and it's not excessively worn. My mechanical knowledge and ability is far behind many of you on here, so I'd appreciate some advice on how to sort this. Thanks Dave Quote Link to comment Share on other sites More sharing options...
Ian M Posted June 15, 2019 Report Share Posted June 15, 2019 hi it sound,s to me like you are missing the ball bearing that sit's between the clutch basket and the actuating rod . Quote Link to comment Share on other sites More sharing options...
dm1 Posted June 16, 2019 Author Report Share Posted June 16, 2019 Thanks Ian, was hoping not to pull the clutch apart as I've never done it before. First time for everything I suppose. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.