Clanned Posted August 7, 2019 Report Share Posted August 7, 2019 Hi, I have a gas gas txt pro racing 2013. When a engage the clutch it starts vibratin. You can feel it in your backwheel. Clutch feels good no drag of weird sounds. Finger height is good anyone any ideas? I use putoline light gear oil! Greetz Clanned Quote Link to comment Share on other sites More sharing options...
lineaway Posted August 8, 2019 Report Share Posted August 8, 2019 I would start with a M/C rebuild kit. Cheap, it couldn`t hurt to freshen it up. Those years were not so good for the M/C. Quote Link to comment Share on other sites More sharing options...
Clanned Posted August 8, 2019 Author Report Share Posted August 8, 2019 4 hours ago, lineaway said: I would start with a M/C rebuild kit. Cheap, it couldn`t hurt to freshen it up. Those years were not so good for the M/C. M/C rebuilt kit? The bike has already new piston and crank bearings Quote Link to comment Share on other sites More sharing options...
huski Posted August 8, 2019 Report Share Posted August 8, 2019 Are the clutch plates fitted in the right order? Quote Link to comment Share on other sites More sharing options...
zippy Posted August 8, 2019 Report Share Posted August 8, 2019 2 hours ago, Clanned said: M/C rebuilt kit? The bike has already new piston and crank bearings Clutch Master Cylinder Quote Link to comment Share on other sites More sharing options...
faussy Posted August 8, 2019 Report Share Posted August 8, 2019 Buckled plates Quote Link to comment Share on other sites More sharing options...
anotherfive Posted August 8, 2019 Report Share Posted August 8, 2019 iT'LL BE INCONSITENT PLATE THICKNESSES. IF YOUVE PUT IT BACK TOGETHER NOT EXAC TLY AS BEFORE THIS CAN HAPPEN. TWO OPTIONS STRIP IT AND RE ALIGN(DIFFICULT) OR LIVE WITH IT FOR A WEEK OR TWO, HAMMER THE CLUTCH AND IT SHOULD REBED AND START FEELING BETTER. Caps lock was on . Not retyping !!! Quote Link to comment Share on other sites More sharing options...
Clanned Posted August 9, 2019 Author Report Share Posted August 9, 2019 16 hours ago, anotherfive said: iT'LL BE INCONSITENT PLATE THICKNESSES. IF YOUVE PUT IT BACK TOGETHER NOT EXAC TLY AS BEFORE THIS CAN HAPPEN. TWO OPTIONS STRIP IT AND RE ALIGN(DIFFICULT) OR LIVE WITH IT FOR A WEEK OR TWO, HAMMER THE CLUTCH AND IT SHOULD REBED AND START FEELING BETTER. Caps lock was on . Not retyping !!! Oke thanks give it a try! Quote Link to comment Share on other sites More sharing options...
Clanned Posted November 26, 2019 Author Report Share Posted November 26, 2019 I order a new set of plates and the problem is gone thanks for the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.