motovita Posted September 11, 2019 Report Share Posted September 11, 2019 (edited) Can anyone tell me the dimensions of the o ring that fits on the crankshaft before the collar, or sleeve, that the right side crank seals ride on on my 199A? I ordered the parts but didn't get that smaller O ring. I'd like to find one in town before I go out to the shop tomorrow. Edited September 11, 2019 by motovita Quote Link to comment Share on other sites More sharing options...
rcgods Posted September 11, 2019 Report Share Posted September 11, 2019 Have not got a parts book for the 199A but in the other ones I have (Model 125 onward) that use the same crank seal type are 50mm x 2mm. The Pursang and Frontera late models are 53mm x 2mm. Quote Link to comment Share on other sites More sharing options...
motovita Posted September 11, 2019 Author Report Share Posted September 11, 2019 7 hours ago, rcgods said: Have not got a parts book for the 199A but in the other ones I have (Model 125 onward) that use the same crank seal type are 50mm x 2mm. The Pursang and Frontera late models are 53mm x 2mm. Thanks but that's the O ring for the flange. I need the one that slides onto the crankshaft before sliding the collar that the seal rides on onto the crankshaft. Quote Link to comment Share on other sites More sharing options...
motovita Posted September 12, 2019 Author Report Share Posted September 12, 2019 Quote Looks like 24X1.2mm. Couldn't find one locally, had to reuse the old one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.