casolagas Posted October 23, 2019 Report Share Posted October 23, 2019 (edited) Quiero instalar el interruptor de cambio de mapa en mi 4rt 260. No sé cuál es el color del cable que necesito. Gracias Edited October 23, 2019 by casolagas Quote Link to comment Share on other sites More sharing options...
pjc Posted October 25, 2019 Report Share Posted October 25, 2019 He's asking 'I want to install the map change switch on my 4rt 260. I don't know what the color of the cable I need is. Thank you,' If anyone wants to help. 1 Quote Link to comment Share on other sites More sharing options...
Johnny Reggie Posted October 26, 2019 Report Share Posted October 26, 2019 On 10/23/2019 at 9:39 PM, casolagas said: Quiero instalar el interruptor de cambio de mapa en mi 4rt 260. No sé cuál es el color del cable que necesito. Gracias On my Repsol (2016) the map switch is connected to the green and green/white (these wires sit in the same 4 way connector). When the circuit is made the high power mode is on. Hope this helps. Cheers, Reg 1 Quote Link to comment Share on other sites More sharing options...
casolagas Posted October 27, 2019 Author Report Share Posted October 27, 2019 18 hours ago, Johnny Reggie said: En mi Repsol (2016), el interruptor de mapa está conectado al verde y al verde / blanco (estos cables se encuentran en el mismo conector de 4 vías). Cuando se realiza el circuito, el modo de alta potencia está activado. Espero que esto ayude. Saludos, Reg If they are white-green, the red strip is the socket for the original switch. I will use one of the auxiliary industry. Quote Link to comment Share on other sites More sharing options...
Johnny Reggie Posted October 31, 2019 Report Share Posted October 31, 2019 I have just bought a 300rr and have made the same changes (it is exactly the same as the Repsol). I have no requirement for the lights and so I have removed the left hand connector (as per your picture) and therefore removed the middle socket with the red blank (again, as per you picture). The map switch connection will then link directly to the male connectors on the left hand side. I hope this is clear. Saludos, Reg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.