dozerash Posted January 15, 2020 Report Share Posted January 15, 2020 Has anyone tried a OKO carb on there SWM 320? If so how did it work? Quote Link to comment Share on other sites More sharing options...
technowaldo Posted January 15, 2020 Report Share Posted January 15, 2020 Put one on my 200 fantic and it totally transformed it but don’t buy a cheap one (£25 ) as they are a copy of a copy Quote Link to comment Share on other sites More sharing options...
djr Posted January 15, 2020 Report Share Posted January 15, 2020 1 hour ago, technowaldo said: Put one on my 200 fantic and it totally transformed it but don’t buy a cheap one (£25 ) as they are a copy of a copy Yes, isn't the OKO a good copy of a Keihin ? and some of the other copies are not so good Quote Link to comment Share on other sites More sharing options...
cleanorbust Posted January 15, 2020 Report Share Posted January 15, 2020 Best place to buy an OKO would seem to be Mid Atlantic Trials in USA. Their website has an OKO section which describes how they've tuned the carbs for specific bikes including SWMs. I'm sure they'd be responsive to any email enquiries. They sell the genuine OKOs, jetted for specific bikes, not the useless copies. I think the price including postage to UK is currently about 115 quid. Quote Link to comment Share on other sites More sharing options...
geoff850 Posted January 15, 2020 Report Share Posted January 15, 2020 Got one on a jumbo but can't really give any feedback as i never rode the bike with the Dellorto, but i can vouch for Mid Atlantic Trials they give a brilliant service and they really help you, from their website they seem to have done one for a 320 so it should be fairly straightforward fitting, they will supply a selection of jets for fine tuning too. Don't buy the £25 ones from e bay they are fakes and Mid Atlantic show you pics of the differences between the fakes and real OKO Most people report very good results on various makes after fitting an OKO. Many Thanks Geoff 1 Quote Link to comment Share on other sites More sharing options...
FreeWheel Posted January 16, 2020 Report Share Posted January 16, 2020 I have used one on my Moto Gori tl320. It made the bike sharper of the bottom and seemed to give cleaner running this was purchased from Mid Atlantic Trials and was 28mm. Since then I have tried a 26mm with the same jetting and found this the be more to my taste did not need the extra top end and sharpness from the 28mm since the stock carb is a 26mm. I have made a aluminum insert piece and used a car hose to couple the airbox to the carb as the rubber will not stretch over the carb inlet. This method stops water from getting in. Here is what I did. The OKO Carburettor has an air intake of 49 which means that the standard air boot will not stretch to fit over it. The method used was to use an over sleeve boot which is 50mm to 45mm the initial length of the boot was 75mm which needs to be cut down on both sides this should be done whilst fitting it to the bike. The boot ends up about 35mm in length. The aluminium sleeve has an id of 35mm and two od's 39mm and 40mm. The 39mm has a length of 16mm and the 40mm a length of 3mm so giving an overall diameter of 19mm looks like a top hat spacer adjust this to suit your airbox and carb distance same with the length of the airbox rubber over sleeve. The throttle cable outer is 1105mm and the inner to the cable nipple ends is 1205mm again adjust to your bike this is using a domino slow action throttle and 6 inch rise rental bars. 2 1 Quote Link to comment Share on other sites More sharing options...
b40rt Posted January 16, 2020 Report Share Posted January 16, 2020 @FreeWheel, did it work out significantly cheaper, and better, than a new Dellorto ? Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted January 17, 2020 Report Share Posted January 17, 2020 I just wonder if the price difference between genuine kehein and oko is worth it? Quote Link to comment Share on other sites More sharing options...
johnnyboxer Posted January 17, 2020 Report Share Posted January 17, 2020 3 hours ago, nigel dabster said: I just wonder if the price difference between genuine kehein and oko is worth it? How much is either and so what's the difference n price? Quote Link to comment Share on other sites More sharing options...
pschrauber Posted January 17, 2020 Report Share Posted January 17, 2020 Sounds interesting, and yes you can get advantages by using flat slide carbs. One step further is the use of SmartCarbs or Lectrons which have an even bigger effect, I have now mounted two SC, one on my Panda (first one) and due to the great experience now also on my Smilla and I'am very pleased and will never ever turn back, best benefit is that you don't have to adjust anything beside idle or if you want to play with engine behavior with the rod screw to get crisper or modarate/slower power output. Costs are a different thing, you can get two and a half brand new Dell'Ortos for one SmartCarb without preparation to get the unit fit to your bike, on the other Hand not to hassle with jets during the year or in different locations is a great Benefit. 1 1 Quote Link to comment Share on other sites More sharing options...
FreeWheel Posted January 17, 2020 Report Share Posted January 17, 2020 The carb cost £57 in January 19 this was from Scooter Assassins in Twain and no import to pay in the UK and is a genuine OKO. You would have to get some pilot, main and needles as the ones supplied are not the correct size. These can be brought in packs of ten different sizes and needle tapers I have used Polini and they seem ok. So this could push the cost above the dellorto. The easy way is to purchase one from Mid Atlantic Trials. Quote Link to comment Share on other sites More sharing options...
turbofurball Posted January 18, 2020 Report Share Posted January 18, 2020 Another vote for Oko here, I have one on the Cota and it works very nicely Quote Link to comment Share on other sites More sharing options...
feetupfun Posted January 19, 2020 Report Share Posted January 19, 2020 Because this has turned into a voting session for OKOs, I'll put my vote in too after having great success with OKOs from Roger working perfectly on TY250A, TY250D, Cota 348 and Alpina 350 motors 1 Quote Link to comment Share on other sites More sharing options...
dozerash Posted January 20, 2020 Author Report Share Posted January 20, 2020 On 1/16/2020 at 1:17 PM, FreeWheel said: I have used one on my Moto Gori tl320. It made the bike sharper of the bottom and seemed to give cleaner running this was purchased from Mid Atlantic Trials and was 28mm. Since then I have tried a 26mm with the same jetting and found this the be more to my taste did not need the extra top end and sharpness from the 28mm since the stock carb is a 26mm. I have made a aluminum insert piece and used a car hose to couple the airbox to the carb as the rubber will not stretch over the carb inlet. This method stops water from getting in. Here is what I did. The OKO Carburettor has an air intake of 49 which means that the standard air boot will not stretch to fit over it. The method used was to use an over sleeve boot which is 50mm to 45mm the initial length of the boot was 75mm which needs to be cut down on both sides this should be done whilst fitting it to the bike. The boot ends up about 35mm in length. The aluminium sleeve has an id of 35mm and two od's 39mm and 40mm. The 39mm has a length of 16mm and the 40mm a length of 3mm so giving an overall diameter of 19mm looks like a top hat spacer adjust this to suit your airbox and carb distance same with the length of the airbox rubber over sleeve. The throttle cable outer is 1105mm and the inner to the cable nipple ends is 1205mm again adjust to your bike this is using a domino slow action throttle and 6 inch rise rental bars. Did you have to cut the stock air box boot down? Quote Link to comment Share on other sites More sharing options...
dozerash Posted January 20, 2020 Author Report Share Posted January 20, 2020 On 1/17/2020 at 5:10 AM, pschrauber said: Sounds interesting, and yes you can get advantages by using flat slide carbs. One step further is the use of SmartCarbs or Lectrons which have an even bigger effect, I have now mounted two SC, one on my Panda (first one) and due to the great experience now also on my Smilla and I'am very pleased and will never ever turn back, best benefit is that you don't have to adjust anything beside idle or if you want to play with engine behavior with the rod screw to get crisper or modarate/slower power output. Costs are a different thing, you can get two and a half brand new Dell'Ortos for one SmartCarb without preparation to get the unit fit to your bike, on the other Hand not to hassle with jets during the year or in different locations is a great Benefit. I wish my SWM was set up as nice as yours! I’ve had no luck finding the Aprilia clutch cover. I will have to look at the cost of the smart carb, would be nice not to worry about jetting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.