turbofurball Posted February 9, 2020 Report Share Posted February 9, 2020 I just looked on ebay since I had it open anyway, lol ... try checking InMotion though, they're more likely to have a comprehensive stock of stuff like that! Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted February 13, 2020 Report Share Posted February 13, 2020 On 2/8/2020 at 9:57 AM, symon said: Couple more questions!...whats the largest size front sprocket you can get to fit the bike...also best oil to use in the pre mix..ratio 40-1?.....best gearbox oil..?.....thanks I daresay you won't be going to the Telford Show but if you are you might visit this stall 2t-offroad (2T now hold the stock of a previous Fantic specialist). You could always just contact them I suppose. Quote Link to comment Share on other sites More sharing options...
symon Posted February 13, 2020 Author Report Share Posted February 13, 2020 No I wont be able to make it..but thanks very much for the info Quote Link to comment Share on other sites More sharing options...
alberto Posted February 13, 2020 Report Share Posted February 13, 2020 gear box 500 ml of ATF oil or light gear oil Putoline, or RS75 Putoline (my favorit) mix 50:1 with mineral 2t oil or 70/80:1 with 100%sintetic 2t oil or 65:1 with semisintethic 2 t oil Quote Link to comment Share on other sites More sharing options...
symon Posted February 15, 2020 Author Report Share Posted February 15, 2020 Thanks.....could you tell me ,regarding gearing...would the 301 pull a 13T front sprocket...with a 39T rear?...….im using the bike in a fun event,which is not trials..where I need more top speed......also is the gearing,in the gearbox different to say a normal endure bike,or is it just the outside front and rear sprocket?? Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted February 16, 2020 Report Share Posted February 16, 2020 Very different. Basically you have four gears fairly close together that you can use in suitable sections, a fifth good for cross country with top for faster off road and comparatively comfortable road use. The standard front was 10 or 11 I think, not sure of standard rear but your proposed gearing would probably kill sixth at least, certainly off road. I can't remember what mine was like but it was pulling a sidecar anyway. You will have noticed that it does not have the poke of an enduro bike. Quote Link to comment Share on other sites More sharing options...
symon Posted February 16, 2020 Author Report Share Posted February 16, 2020 Thanks that's great info....its a quarter mile drag race!!...so maybe start in 2nd or 3rd gear?....I just need a longer first gear to get away and not change up so quickly...…. Quote Link to comment Share on other sites More sharing options...
turbofurball Posted February 16, 2020 Report Share Posted February 16, 2020 Trials bikes are not geared like street bikes, the first four gears take you to about where 1st gear on a street bike would be. If geared up it'll get up to something like 40mph within 30 meters, and then not go much faster. If you wanted a bike to compete in a drag race a trials bike is about as far from ideal as you could get, they're literally made for going slow; a stock CB125 would get a better time. Quote Link to comment Share on other sites More sharing options...
symon Posted February 16, 2020 Author Report Share Posted February 16, 2020 turbofurball,thanks...i might have to change plan!!!..:-) Quote Link to comment Share on other sites More sharing options...
huski Posted February 16, 2020 Report Share Posted February 16, 2020 Not sure it would like being held flat out for a quarter mile anyway,really not what it's designed for Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted February 16, 2020 Report Share Posted February 16, 2020 2 hours ago, huski said: Not sure it would like being held flat out for a quarter mile anyway,really not what it's designed for Hah, have you ever ridden the SSDT?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.