ssdt1980 Posted March 8, 2020 Report Share Posted March 8, 2020 Trying to remove the swinging arm spindle from a Model 221 and it's not moving even slightly, any tips on heating it up to remove... Planning on replacing with new Inc bushes, grateful for any help. Cheers Quote Link to comment Share on other sites More sharing options...
pschrauber Posted March 8, 2020 Report Share Posted March 8, 2020 Don't heat it up, the swing arm comes with a rubber insert with an inner tube through that the swing arm axle is going through. That is how the swing arm was constructed on my 221. I recommend to pull the axle out by drilling a hole on the other end then inserting an m8 thread from there on it is easy. Quote Link to comment Share on other sites More sharing options...
ssdt1980 Posted March 9, 2020 Author Report Share Posted March 9, 2020 12 hours ago, pschrauber said: Don't heat it up, the swing arm comes with a rubber insert with an inner tube through that the swing arm axle is going through. That is how the swing arm was constructed on my 221. I recommend to pull the axle out by drilling a hole on the other end then inserting an m8 thread from there on it is easy. Great tip thanks... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.