v1nn1e Posted April 4, 2020 Report Share Posted April 4, 2020 Went to remove all spring preload and the allen screw in the top cap appears to be seized fast; it won't budge in either direction. I believe, according to my handbook, that they are Ceriani forks. So, does anyone know of any trick/tip to un-seizing the adjuster? Otherwise, anywhere I can get a complete new fork tube top cap? Nothing that I could find on the splatshop web site. Thanks in advance Quote Link to comment Share on other sites More sharing options...
huski Posted April 4, 2020 Report Share Posted April 4, 2020 Spray it with WD40 for a few days,then try heating it up.You can't make it worse Quote Link to comment Share on other sites More sharing options...
v1nn1e Posted April 29, 2020 Author Report Share Posted April 29, 2020 Tried un-seizing it without success. Splat Shop have a different replacement that will require a different spacer - anyone know of any good places for obscure Ceriani fork parts...? Thanks Quote Link to comment Share on other sites More sharing options...
v1nn1e Posted April 29, 2020 Author Report Share Posted April 29, 2020 Anyone ever made their own fork pre-load spacer from PVC pipe? May give it a go... Quote Link to comment Share on other sites More sharing options...
v1nn1e Posted April 30, 2020 Author Report Share Posted April 30, 2020 FWIW... for anyone in the future who may be reading this post... Apparently, Beta bought the Ceriani business in ~2011/12 and so Beta forks from around this time look to be similar to the 2011 Sherco Ceriani's Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.