Listerjag Posted January 27, 2021 Report Share Posted January 27, 2021 On 5/21/2020 at 11:26 PM, baldilocks said: There is a rose joint for the lower shock mount but its in the linkage where the reiger shock connects . There are two spacers which press into the rose joint, the shock lower fork straddles it. That's how it is on both of my RRs. You can see it on the parts diagram. With zero load on rear suspension my rose joint outer has play left to right, the rose joint is no longer a tight fit in the alloy linkage. No up and down play. Quote Link to comment Share on other sites More sharing options...
baldilocks Posted January 27, 2021 Report Share Posted January 27, 2021 (edited) If bearing is not a tight fit in the linkage to the extent it can move left to right then I would change that part of the linkage. Id think this will put more strain on the upper rose joint if the lower one is moving left to right. Before long it will have vertical lift I would think. You should be able to twist the shock but the outer bearing surface must be tight in the linkage to work correctly. Edited January 27, 2021 by baldilocks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.