Excessive Posted May 21, 2020 Author Report Share Posted May 21, 2020 I did lap the flywheel and shaft based on 8info I had cleaned from this forum Quote Link to comment Share on other sites More sharing options...
Excessive Posted May 29, 2020 Author Report Share Posted May 29, 2020 The bike is done. Still needs some carb tuning. Starts up , with choke, one or two kicks. Keep in mind that it isnt original. The parts that were missing or damaged were replaced with what was on hand or made. 2 2 Quote Link to comment Share on other sites More sharing options...
Excessive Posted May 29, 2020 Author Report Share Posted May 29, 2020 Still need to fab a skid plate Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted May 29, 2020 Report Share Posted May 29, 2020 Thats great, and what its all about, fab that skid plate! 1 Quote Link to comment Share on other sites More sharing options...
baldilocks Posted May 29, 2020 Report Share Posted May 29, 2020 Plenty fun to be had with that bike. Had a JT50 as a child but nothing bigger Quote Link to comment Share on other sites More sharing options...
psla Posted July 10, 2020 Report Share Posted July 10, 2020 hi … you don't need carb tuning, original yet-sizes work fine, you need a air hose, for example take one from a beta rev and the points from a old Lampretta scooter. What tank is installed? gP Quote Link to comment Share on other sites More sharing options...
Excessive Posted July 10, 2020 Author Report Share Posted July 10, 2020 I'm not even sure what tank it is. It came with the bike but was questionably mounted. Just added better mounts to the frame. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.