lotus54 Posted May 29, 2020 Report Share Posted May 29, 2020 I did some searching, but didn’t see any answer. Is there any sort of Service Manual available for the Vertigo? software for the FI with diagnostics etc? Quote Link to comment Share on other sites More sharing options...
Primodious Posted May 29, 2020 Report Share Posted May 29, 2020 Yes there is a 174 page service/workshop manual for the Vertigo. There is a dealer kit software for the ECU which includes an interface for the ECU and 3 different bits of software which are tied in to a USB dongle with a dealer license that they have to renew yearly. All the electronics, FI etc can be diagnosed/tested and calibrated through this software. 1 Quote Link to comment Share on other sites More sharing options...
syspig Posted May 29, 2020 Report Share Posted May 29, 2020 Good to know - thanks. Unfortunately, I inquired about a service manual directly with Vertigo via their Facebook page and was given a different answer. As a customer, they only offered a link to the Vertigo parts book - and nothing else. That and the rudimentary owners manual are all I've seen. There's also no documentation for the Athena Wificom setup I bought with the bike beyond the very basics, i.e. how to hook it up. I've gleaned a few insights watching Wiget tutorials for other bikes, so I am making headway - but that learning curve is a bit steep. I suppose I should inquire with them again, but given you're aware of the service/workshop manual, software and hardware - is this something that's available to mere mortals, and not just dealers? My nearest dealer is 5 hours away, and having this technical info at my fingertips has been my lone pet peeve about Vertigo. Even if I had a dealer nearby, I'd prefer to do all the work myself. Quote Link to comment Share on other sites More sharing options...
Primodious Posted May 29, 2020 Report Share Posted May 29, 2020 @syspig They certainly don’t make it easy to get hold of the workshop manual, that’s for sure! If you PM me with your email address I can send you a digital copy. As far as I am aware the software kit is only available to official dealers, which I can imagine is a pain if you are 5 hours away from a dealer. I’m fortunate in that I’m currently living only 20mins from a dealer. Having the FI setup by someone knowledgeable made a huge difference to my bike. The dealer said the system on the newer bikes allows even more precise setup of the carburation. If you are looking for setup information on the GET ECU then there is a 15min video here, maybe you've already seen it? It’s not a Vertigo but it should be the same process https://slavensracing.com/how-to-tune-your-get-ecu-equipped-dirt-bike/ Quote Link to comment Share on other sites More sharing options...
syspig Posted May 29, 2020 Report Share Posted May 29, 2020 Thanks much for the offer - PM sent! Related to Wiget programming of the ECU - part of the reason I'd like the service manual is to see wiring specs and diagrams. It would be nice to figure out how to wire in a battery for ECU programming so you don't have to have the bike running to do so. And yes, Slavens videos are some I've seen. This one is pretty good as well. 1 Quote Link to comment Share on other sites More sharing options...
TakeFive Posted July 13, 2020 Report Share Posted July 13, 2020 Depends on year of your bike if it's a 20016/17 it'll have a skynam ecu,not a get. I have some info and manuals on this model. Quote Link to comment Share on other sites More sharing options...
massimo Posted September 11, 2020 Report Share Posted September 11, 2020 I have the workshop manual of the 2016 models. If anybody need it send me PM with email address. On the other hand, I am looking for 2018 workshop manual. Any help appreciate ! 1 Quote Link to comment Share on other sites More sharing options...
richtr300i Posted October 21, 2020 Report Share Posted October 21, 2020 On 5/29/2020 at 2:37 PM, syspig said: Thanks much for the offer - PM sent! Related to Wiget programming of the ECU - part of the reason I'd like the service manual is to see wiring specs and diagrams. It would be nice to figure out how to wire in a battery for ECU programming so you don't have to have the bike running to do so. And yes, Slavens videos are some I've seen. This one is pretty good as well. So, in 99% of the cases, you shouldn’t need to tune anything on a Vertigo...however the functionality is a thing. For the best source in the US, contact Dustin at MotoLand Trials in Kansas - he’s fiddled with the WiGet the most that I’ve heard of.... Quote Link to comment Share on other sites More sharing options...
Gray_side_up Posted October 29, 2020 Report Share Posted October 29, 2020 Has anyone got their hands on a service manual for the 2018 model year? given both snow and Covid restrictions, looks like I will have a few months to get more familiar with the inner workings. Thanks. 1 Quote Link to comment Share on other sites More sharing options...
Simonelongus Posted November 24, 2020 Report Share Posted November 24, 2020 Hello, interested in the 2016 manual I'll leave the email if anyone can send it to me bernardi.simone@live.it Thanks Quote Link to comment Share on other sites More sharing options...
Simonelongus Posted November 30, 2020 Report Share Posted November 30, 2020 Thank you all for the manual, arrived. Thanks.. Quote Link to comment Share on other sites More sharing options...
beatprojim Posted December 18, 2020 Report Share Posted December 18, 2020 Hi, it looks like Simonelongus received a workshop manual just by asking so here goes! I have a 2020 Vertical 250 so if anyone can send me a workshop manual for this bike or the closest one you have it would be greatly appreciated. Thanks in advance! Beatprojim@gmail.com Quote Link to comment Share on other sites More sharing options...
Primodious Posted December 18, 2020 Report Share Posted December 18, 2020 10 hours ago, beatprojim said: Hi, it looks like Simonelongus received a workshop manual just by asking so here goes! I have a 2020 Vertical 250 so if anyone can send me a workshop manual for this bike or the closest one you have it would be greatly appreciated. Thanks in advance! Beatprojim@gmail.com Hi, I'll get a copy sent to you today. 1 Quote Link to comment Share on other sites More sharing options...
dog Posted January 5, 2021 Report Share Posted January 5, 2021 On 12/18/2020 at 10:41 AM, Primodious said: Hi, I'll get a copy sent to you today. Dude, i would LOVE a copy too please : I need some torque values etc. Thanks in advance dogeater@gmail.com Quote Link to comment Share on other sites More sharing options...
Simonelongus Posted January 7, 2021 Report Share Posted January 7, 2021 Manual sent, who is still missing? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.