burns1989 Posted July 20, 2020 Report Share Posted July 20, 2020 Hi all stripped the clutch on my rev 3 250 measures the thickness of the plates and they are at 2.7mm thickness . And when new they are 2.8mm so I would have thought 0.1 mm wouldn't be too much to cause clutch slip . So I have changed the oil for a light 75 w gear oil by putaline so I am hoping this should cure the problem . Quote Link to comment Share on other sites More sharing options...
dan williams Posted July 20, 2020 Report Share Posted July 20, 2020 Try dressing the steels with fine emery cloth. 2.7mm is nominal thickness. At least that is what I’ve always measured. Quote Link to comment Share on other sites More sharing options...
burns1989 Posted October 12, 2020 Author Report Share Posted October 12, 2020 Right iv only now managed to get out and ride sunday just gone , and my clutch is not slipping , I cleaned the plates off and used 75 light gear oil and she is working as she should Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.