Bobbyevo Posted October 1, 2020 Report Share Posted October 1, 2020 Hy all new on here just looking for some info on the beta rev 3 clutch shims and washers I no there’s a washer/shim behind the clutch listed as number part 3 a thicker washer in between the clutch hub and basket listed as part number 10 but I have a thin shim and a washer left do they both go on the clutch release bearing listed as part 18 as the schematic only shows one thanks for any help with this Quote Link to comment Share on other sites More sharing options...
totty79 Posted October 1, 2020 Report Share Posted October 1, 2020 Shims are added at 18 to adjust the clearance to between 0.2 and 0.8mm Quote Link to comment Share on other sites More sharing options...
Bobbyevo Posted October 3, 2020 Author Report Share Posted October 3, 2020 Thanks for the reply I couldn’t get my head round it because it dosnt show it in the manual ?? Quote Link to comment Share on other sites More sharing options...
pauls320 Posted October 3, 2020 Report Share Posted October 3, 2020 One note: install shim(s) between 14 and 18s hardened washer outer face, not directly against the thrust bearing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.