Stakes Posted October 8, 2020 Report Share Posted October 8, 2020 Got my bike in bits since I bought it as a botched but running machine (for 5 years!). When I bought it I drained the g/box oil and a small broken shim washer fell out. I suspect this was the #41 on the secondary shaft from the manual (I use the Evo 2010/11 manual which I have been told is relevant to the 2008 270 motor). I have a couple of questions. I am unsure of the direction of 1st gear on the secondary shaft (see photos - is it 1 or 2). Also I have a shim washer #4 on the primary shaft 20mm x 30mm x 0.5mm in the manual but mine measures 1.0mm thick? Quote Link to comment Share on other sites More sharing options...
lineaway Posted October 8, 2020 Report Share Posted October 8, 2020 I would assume it would be number one. Did you not take a pic before you took it apart? You should also be able to spin the shafts before you reassemble and see it work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.