gasgas Posted February 4, 2006 Author Report Share Posted February 4, 2006 yeah, strictly premix here Quote Link to comment Share on other sites More sharing options...
sam Posted February 4, 2006 Report Share Posted February 4, 2006 O.K. I see now which companies offer a blend pre-mix oil. 100:1 mixture? isnt that a little to lean. Quote Link to comment Share on other sites More sharing options...
gasgas Posted February 4, 2006 Author Report Share Posted February 4, 2006 (edited) No 100:1 or 1% isn't too lean for me. When you see my playground you understand why. It is half throttle max riding for only a blip. Richer wld load her up with carbon even more. The most guys are running 1:80 but these bikes use full throttle for longer periods, like hill climbs etc. trailriding i also wld use 1:70-80 for safety precautions although i doubt the necessitty of it, with nowadays synthetics. Just took off the exhaust pipe to have a look at the inside and the full throttle blasting of yesterdays really cleaned things up for the better. Rings look cleaner and the cilinder crosshatch pattern looks cleaner too, and the cilinderhead has some dry carbon now. There is no carbon at the squish at all.(like in the picture on top) Had i cleaned the motor earlier things wld have looked even better, i reckon now. The day before yesterday the cilinderwall was a little brownish glaced and now it looks clean again Edited February 4, 2006 by gasgas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.