Trials123 Posted November 6, 2020 Report Share Posted November 6, 2020 Hi All, I've recently bought some tech forks for my Beta Evo 2020, with S3 yolks. I've managed to installed them fine but can't find any instructions as to the right height for the stanchions in the yolks. There is a ring at the top of each tube, I assume this needs to align with the top of the yolk? Does anyone know? Also, for anyone interested in doing the same upgrade, you need a 9mm thick M20 spacer for the axel (brake caliper side) and x2 5mm thick (ish) spacers for the brake caliper bolts. I made the wheel spacer by buying a 4rt spacer and cutting it down. The beta evo also needs an O ring under the bottom headstock bearing. 1 Quote Link to comment Share on other sites More sharing options...
cascao Posted November 7, 2020 Report Share Posted November 7, 2020 This weight is a personal preference and you can experiment what work better Quote Link to comment Share on other sites More sharing options...
Trials123 Posted November 7, 2020 Author Report Share Posted November 7, 2020 Thanks Casco. I managed to find a thread that said the lower they are the less the front wheel will wash out, the higher the mote stable it will be. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.