chudder Posted November 29, 2020 Report Share Posted November 29, 2020 whats the best way to start a 348 with a decompressor on it.I am strugling to get the hang of it. Thanks in advance,Chud Quote Link to comment Share on other sites More sharing options...
jonboy883 Posted November 29, 2020 Report Share Posted November 29, 2020 (edited) I've used one, on and off, I am 100kgs at 6'4", so my method may be a bit different to yours, but a couple of blips of the throttle, pre-kicking then leave it alone. Tweek kickstart to TDC and then one good firm, kick down at a fairly good pace, not slow! give it a go..... Edited November 29, 2020 by jonboy883 Quote Link to comment Share on other sites More sharing options...
nh014 Posted November 29, 2020 Report Share Posted November 29, 2020 Similar to what Jonboy883 has said, when cold, I kick it through slowly, two or three times, to kind of prime it. Then give it about 1/4 throttle, get it on compression with the kickstart, and then come down hard and swift. Usually takes two or three kicks like this and it's running. Fast and hard kicks are the secret. You can't baby it. Quote Link to comment Share on other sites More sharing options...
sparkieb Posted November 29, 2020 Report Share Posted November 29, 2020 Push it to compression with the kickstart, ease it over compression using the decompressor then a hefty kick, remembering to use the footrest as a stop for your foot. Or the lug on the kickstart (inside the housing) will punch a hole thru to the magneto/points ? Quote Link to comment Share on other sites More sharing options...
rotors7 Posted November 29, 2020 Report Share Posted November 29, 2020 As previously said, be firm and positive or you may find your knee cap embedded in the renthals. I have the much unwanted t shirt, several times ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.