rileys Posted February 13, 2021 Report Share Posted February 13, 2021 Hi everyone. help please I have a Sherpa 151 model. Is it the 2 seals or 4 seals from inmotion for this model greg Quote Link to comment Share on other sites More sharing options...
woody Posted February 13, 2021 Report Share Posted February 13, 2021 Look at what's fitted before you order as engine components changed a few times in the early 70s so you need to know which is in there. Not only the size but quantity as well, some have 1 some have 2 per side Quote Link to comment Share on other sites More sharing options...
bullylover Posted February 15, 2021 Report Share Posted February 15, 2021 It will be the 4 seals from In Motion you need. Insert these seals back to back so they face in different directions. I always have the spring side facing towards the out side of the seal carrier on both sides of the carrier. Quote Link to comment Share on other sites More sharing options...
rileys Posted February 15, 2021 Author Report Share Posted February 15, 2021 17 hours ago, bullylover said: It will be the 4 seals from In Motion you need. Insert these seals back to back so they face in different directions. I always have the spring side facing towards the out side of the seal carrier on both sides of the carrier. Thanks guys. It was confusing because there was only one fitted again thank you 1 Quote Link to comment Share on other sites More sharing options...
bullylover Posted February 16, 2021 Report Share Posted February 16, 2021 If you look closely at the old seal you will find it is a double lipped seal. The new ones are only a single lipped seal which is why you need two of them facing in opposite directions. The old one is about 14mm wide and the new single ones are 7mm wide. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.