Robboshome Posted February 14, 2021 Report Share Posted February 14, 2021 Can someone advise how to mount fuel tank to fecked purchased bar, can’t seem to find any fixing kit ? Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 14, 2021 Report Share Posted February 14, 2021 (edited) Usually a bolt, welded to the frame, rough!y vertically. The length and position determined by the tank. A rubber bung is sandwiched between two largeish washers, and when compressed holds the tank. Usually some pipe insulation under the tank keeps everything snug. Edited February 14, 2021 by b40rt 1 Quote Link to comment Share on other sites More sharing options...
trialsrfun Posted February 14, 2021 Report Share Posted February 14, 2021 Make a saddle possibly by cutting a length of steel tubing in half longitudinally then weld a bolt vertically to the outside of the tube thread pointing upwards the correct length to secure the tank as on the above post, secure the saddle to the frame top tube using two Jubilee clips. Quote Link to comment Share on other sites More sharing options...
Robboshome Posted February 14, 2021 Author Report Share Posted February 14, 2021 Thanks lads, I have the aftermarket bar with the nut welded in to accept a bolt just thought it might need more than this to stop it swinging about ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.