AmyK Posted February 18, 2021 Report Share Posted February 18, 2021 I have had this sweet little bike for a couple of years. I've done a few things, water pump and all bearings, fixed the fan motor, new shock, new fork seals, new shoes. She runs nice and starts pretty easy. I'm a beginner, so probably not too fussy. I have no idea about the history. When do I consider a top end? Based on the age, I will guess that will include cylinder plating and bottom end bearings too. I don't want to wait until it's too bad that I can't fix it. TIA! Quote Link to comment Share on other sites More sharing options...
technowaldo Posted February 19, 2021 Report Share Posted February 19, 2021 Leave it alone if it’s quiet and running fine there not like mx bikes that need regular rebuilds 2 1 Quote Link to comment Share on other sites More sharing options...
misscrabstick Posted February 20, 2021 Report Share Posted February 20, 2021 Rattle = fix No rattle = carry on as normal 1 Quote Link to comment Share on other sites More sharing options...
Creepytheclutchmaster Posted February 21, 2021 Report Share Posted February 21, 2021 I wouldn't bother until it has such little compression it doesn't run and sounds like a bag of spanners lol. Check your thermostat is working regularly thow got my rev 3 out today and the thermostat is dead.was working fine when I put it away a month or so ago. 1 Quote Link to comment Share on other sites More sharing options...
dan williams Posted February 21, 2021 Report Share Posted February 21, 2021 A set of rings will restore some zip if it’s lacking or hard to start but these chrome bore cylinders don’t wear like the old bikes. If you’re happy with the power and it’s happily humming along it’s fine to just keep riding. 1 Quote Link to comment Share on other sites More sharing options...
AmyK Posted February 21, 2021 Author Report Share Posted February 21, 2021 18 hours ago, Creepytheclutchmaster said: Check your thermostat is working regularly thow got my rev 3 out today and the thermostat is dead.was working fine when I put it away a month or so ago. Mine was not working so I direct wired it. Quote Link to comment Share on other sites More sharing options...
AmyK Posted February 21, 2021 Author Report Share Posted February 21, 2021 3 hours ago, dan williams said: A set of rings will restore some zip if it’s lacking or hard to start but these chrome bore cylinders don’t wear like the old bikes. If you’re happy with the power and it’s happily humming along it’s fine to just keep riding. Well, so far so good then! Do I need to measure my cylinder to know which rings to get? (A-B-C pistons, etc) - Or is it just one size for rings? Quote Link to comment Share on other sites More sharing options...
dan williams Posted February 23, 2021 Report Share Posted February 23, 2021 This is the parts list. Only one ring size. https://betausa.com/content/SUPPORT_PDF's/2005 Rev 125-200 2 stroke.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.