AngelX13 Posted May 27, 2021 Report Share Posted May 27, 2021 Is anyone using S3 Bar Ends on a EPure? I'm trying to figure out which model bar ends to get. #5 or TOO? I guess the question is does the EPure have a closed or open throttle tube? Quote Link to comment Share on other sites More sharing options...
trapezeartist Posted May 29, 2021 Report Share Posted May 29, 2021 I changed the grips on mine recently, and I think the throttle tube was open. Quote Link to comment Share on other sites More sharing options...
dgshannon Posted June 23, 2021 Report Share Posted June 23, 2021 You can drill out the tube cap, if it is closed. Quote Link to comment Share on other sites More sharing options...
dgshannon Posted September 2, 2021 Report Share Posted September 2, 2021 On 5/27/2021 at 2:06 AM, AngelX13 said: Is anyone using S3 Bar Ends on a EPure? I'm trying to figure out which model bar ends to get. #5 or TOO? I guess the question is does the EPure have a closed or open throttle tube? The throttle tube on the EM is open. I went with these orange ones from ZETA, to compliment the bike colors. Top quality kit. Available from the Tryals Shop: https://www.tryalsshop.com/Bar-Ends-Plug-Handlebar-Zeta-p39622585 Quote Link to comment Share on other sites More sharing options...
AngelX13 Posted September 2, 2021 Author Report Share Posted September 2, 2021 Looks great! 1 Quote Link to comment Share on other sites More sharing options...
AngelX13 Posted October 12, 2021 Author Report Share Posted October 12, 2021 I ordered my bike back in March and eventually the order got updated to a 2022 model (which I'm happy about) and yippee, it arrived at the dealer today, finally. I ended up getting the S3 #5s and will try something like you describe. Thanks. 1 Quote Link to comment Share on other sites More sharing options...
GrahamM78 Posted November 13, 2021 Report Share Posted November 13, 2021 I have a 2021 escape and trying to find bar ends that fit. I bought a set of Jitsies from TryalsShopUSA, and they don't fit. my digital calipers say the ID of my bars is 10.83 mm. not even the 10mm nut fits in, where tip to tip on the 10mm nut is 11.27mm and the shank of the bar end itself is 13.57mm. These: https://www.tryalsshop.com/Bar-Ends-Plug-Handlebar-Jitsie-p59827689 Are these the same size bars as the Epure that folks are using the S3 or Zeta in? Mike at TryalsShop said his webmaster has an EM and used the Zeta bar ends but the size appeared identical to the Jitsies so I am confused. Will I need to drill out my bars or..? Quote Link to comment Share on other sites More sharing options...
dgshannon Posted February 2, 2022 Report Share Posted February 2, 2022 On 11/12/2021 at 10:52 PM, GrahamM78 said: Mike at TryalsShop said his webmaster has an EM and used the Zeta bar ends but the size appeared identical to the Jitsies so I am confused. Will I need to drill out my bars or..? That would be me. The ZETA bar ends come with two different size inserts, in the package. No drilling of the bars required, with the correct set of inserts. (The set to the right, running vertically.) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.