fullchoke Posted September 14, 2021 Report Share Posted September 14, 2021 Do people ride the early Challengers in Classic Trials? They were a light 250 bike in their time, and with a big sprocket, I was wondering how they might work with that leading link front suspension. Bars might be a bit wide, but that can be changed. Greeves may have built a better Trials bike in 1964, but the Challenger seems like it could be good... with a few changes. What do you guys think? Thanks Quote Link to comment Share on other sites More sharing options...
stpauls Posted September 14, 2021 Report Share Posted September 14, 2021 I think the Greeves Challenger was a Scrambler, not a Trials bike. It might be a bit too lively for Trials, even with lower gearing. However, I regularly see two pretty original looking Greeves Anglians with leading link front forks, Villiers engines and the cast aluminium front down tube being ridden in Classic Trials, on the Middle route by experienced riders in the south West of England. They are as good as me, if not better! Quote Link to comment Share on other sites More sharing options...
ttspud Posted September 14, 2021 Report Share Posted September 14, 2021 Quote I think the Greeves Challenger was a Scrambler, not a Trials bike I doubt that would be too much of an issue, it sounds like many bikes ridden/being ridden in pre65 trials were road bike versions anyway, just lightened and so on. Here you go, this guy comes all the way from Germany to ride the Talmag on a 1925 Indian with fairly roadish tyres. Germany's Holger Schonknecht turned out on a 1925 Indian And spectators and riders alike adored the bike, it was absolutely brilliant. That's true, non-British bikes might need adding to those rules..... Quote Link to comment Share on other sites More sharing options...
trialsrfun Posted September 14, 2021 Report Share Posted September 14, 2021 (edited) The Greeves Challenger is a scrambles/moto-x bike fitted with a small diameter Stefa ignition, very well suited to what it was intended for but unsuited to trials use. The Challenger cylinder and head with slight variation were used on the TFS, TGS, THS and TJS Greeves trials bikes. The head angle on the Greeves alloy I beam didn't really change but the make up of the fork yokes on the leading link forks certainly did to change the steering angle. Edited September 14, 2021 by trialsrfun Quote Link to comment Share on other sites More sharing options...
woody Posted September 14, 2021 Report Share Posted September 14, 2021 My first bike was a Challenger - it's a pure scrambles bike, totally useless as a trials bike, the engine characteristics are for speed with no low down torque Quote Link to comment Share on other sites More sharing options...
fullchoke Posted September 14, 2021 Author Report Share Posted September 14, 2021 If low down torque was absent that would be a major problem in slow going. I didn't think about that big issue with a MX bike... I should have considered the powerband, if it comes on quickly, not so good for Trials, but probably ok for trail riding, if geared down in those years. Later MX bikes were ported for HP, and hard to handle even on a MX track. I saw a few trying the steep hills, I used to ride, back in the 70's and early 80's, and once they fell off the pipe they were done instantly. Once in a while you saw parts coming down the hill. Quote Link to comment Share on other sites More sharing options...
greevesrob Posted September 14, 2021 Report Share Posted September 14, 2021 Not so good for trials but would be good for trails don't forget the isdt Greeves were based on the challenge Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.