glitter95 Posted February 1, 2022 Report Share Posted February 1, 2022 Hi, I'm after a couple of sidi boot straps, old style ones Quote Link to comment Share on other sites More sharing options...
Glayne Posted February 1, 2022 Report Share Posted February 1, 2022 I'm all ears for a response here, my kid is missing a few of the straps that look the same, straps got brittle. Electrical tape has been our go to, hope you find a lead. Quote Link to comment Share on other sites More sharing options...
faussy Posted February 1, 2022 Report Share Posted February 1, 2022 They seem listed on sidis website, may be best contacting them directly https://www.sidi.com/en/spare-parts/413-strap-m-flex-force.html Quote Link to comment Share on other sites More sharing options...
Glayne Posted February 1, 2022 Report Share Posted February 1, 2022 And at the top of the page I get this "You cannot place a new order from your country (Canada)" I'll try the part # around the Google though. Thanks! 1 Quote Link to comment Share on other sites More sharing options...
Cee-B Posted February 1, 2022 Report Share Posted February 1, 2022 Good luck. I managed to source a couple from a member of this forum a couple of years ago, but don't think there are any still available commercially. Quote Link to comment Share on other sites More sharing options...
Greenways Posted March 9, 2023 Report Share Posted March 9, 2023 I am looking for some too or an alternative method. Quote Link to comment Share on other sites More sharing options...
Glayne Posted March 10, 2023 Report Share Posted March 10, 2023 ...Electrical tape... Quote Link to comment Share on other sites More sharing options...
diagnosis Posted September 15, 2024 Report Share Posted September 15, 2024 Sorry to bring this back from the dead, but was there any luck in finding a replacement strap for these boots? Mine unfortunately lost the battle today. Quote Link to comment Share on other sites More sharing options...
cascao Posted Friday at 06:43 PM Report Share Posted Friday at 06:43 PM If I put my hands in one, will be easy to draw in 3D and print in PET or polyurethane Quote Link to comment Share on other sites More sharing options...
majesty Posted Saturday at 12:55 PM Report Share Posted Saturday at 12:55 PM (edited) Try slicing an old inner tube into 1.5 inch wide bands and sliding them on before putting the boot on and then sliding it over the closed boot. Edited yesterday at 10:58 AM by majesty Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.