NoTraction Posted February 26, 2022 Report Share Posted February 26, 2022 Just wondered who makes the best fitting levers for the Evo Grimeca clutch and brake controls on a 2020 Evo 200? I’ve got a couple of sets of basic Apico dual purpose ones with the two sets of adjuster holes but they don’t have the same fit and feel as a genuine Beta one I have, a short type clutch lever from a Rev3. Unfortunately I only have one though and no brake side. And I prefer a matching pair! AS3 make some that look good or there’s the Apico Elite. Or does anyone make an OEM replica? Don’t really want to pay £30 odd quid each side for ones from Beta. Any suggestions? Quote Link to comment Share on other sites More sharing options...
totty79 Posted February 26, 2022 Report Share Posted February 26, 2022 I like the fold back type. It's common practice to leave the clamps slightly loose so when you drop it they move instead of snapping a lever. I prefer to have the clamps tight to keep the levers in a set position and you can do this with Flexi/folding levers. 1 Quote Link to comment Share on other sites More sharing options...
rcgods Posted February 26, 2022 Report Share Posted February 26, 2022 5 hours ago, Hughie said: Just wondered who makes the best fitting levers for the Evo Grimeca clutch and brake controls on a 2020 Evo 200? I’ve got a couple of sets of basic Apico dual purpose ones with the two sets of adjuster holes but they don’t have the same fit and feel as a genuine Beta one I have, a short type clutch lever from a Rev3. Unfortunately I only have one though and no brake side. And I prefer a matching pair! AS3 make some that look good or there’s the Apico Elite. Or does anyone make an OEM replica? Don’t really want to pay £30 odd quid each side for ones from Beta. Any suggestions? I like the Jitsie ones. Quote Link to comment Share on other sites More sharing options...
feetupsbetter Posted February 26, 2022 Report Share Posted February 26, 2022 I have to say I never saw the point of folding levers (at the price premium), just slacken the clamps as totty79 says, and 9 times out of ten they survive being dropped. However when I bought my evo it had them fitted and I now think they’re fab. Only negative is that sometimes when you want to lean your bike against a tree, the lever folds back making it necessary to fiddle around to get a perfect parking spot ! If you really struggle to get standard types to be a snug fit in the bar clamp, are you getting the ones with plastic ‘top hat’ bushes ? If so you can easily make plastic/nylon washers to take up the slack. Quote Link to comment Share on other sites More sharing options...
NoTraction Posted February 26, 2022 Author Report Share Posted February 26, 2022 Good idea Ref the plastic washers… but that wasn’t it really, I just think the one OEM Beta/Grimeca lever I have is more substantial and feels better than the thinner Apico ones I have. It’s no biggie, but I was wondering which brand is nearest to the original in terms of thickness and feel. The Apico ones, at least the ‘basic’ ones seem skinnier… wondered who’s are best I suppose, or of indeed there’s a lot of difference brand for brand (S3, Apico, Jitsie, AS3 etc…) Quote Link to comment Share on other sites More sharing options...
MIckyT Posted February 28, 2022 Report Share Posted February 28, 2022 The S3 levers are very good quality feel nice and very Strong 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.