turbofurball Posted March 27, 2022 Report Share Posted March 27, 2022 Does anyone have a recommendation for footpegs that are a bit back and down from stock? I've not been able to find anything that looked good without costing the earth, and I don't want to re-weld the mounts Quote Link to comment Share on other sites More sharing options...
feetupfun Posted March 27, 2022 Report Share Posted March 27, 2022 What bike? 2 Quote Link to comment Share on other sites More sharing options...
teamferret Posted March 29, 2022 Report Share Posted March 29, 2022 To see how you like it (or otherwise) try removing the footrests and bolting them on the outside of the bottom part of the hanger. If good you can normaly fabricate a new part for the bottom bit and bolt it on. Have done this on my Armstrong and the brothers Fantic Quote Link to comment Share on other sites More sharing options...
turbofurball Posted March 29, 2022 Author Report Share Posted March 29, 2022 On 3/27/2022 at 11:13 PM, feetupfun said: What bike? A Rieju Tango 2.0. Footpegs from a Gasgas EC250 fit, but are slightly higher. Maybe I should try the ones off my Sherco ... As for ergonomics, even with the footpegs changed they'll still be far higher and further forward than a trials bike, lol. It's a physically small bike for a trailie but rides exceptionally well, so I want to move the pegs as well as raising the bars. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.