dozerash Posted April 3, 2022 Report Share Posted April 3, 2022 I’m going to be working on a friends 1985 Can Am (Armstrong) 240 (Rotax) trials bike. I have a couple of SWM 320s (280 Rotax) . So I know where to get any engine parts. The body and frame parts I’m not so sure about. We need the following: muffler... ...carb kit... ...seat... ...all cables... ...decals... ...intake tube from carb to engine...since it has the Amal carb the intake tube appears different(smaller id) SWM? ...air filter... ...rear sprocket... ...front and rear fenders ...what handlebars do you recommend?.. thanks Quote Link to comment Share on other sites More sharing options...
teamferret Posted April 7, 2022 Report Share Posted April 7, 2022 Most of what you want should be available from John Penny at Armstrong Trials, he has a web site but it does not appear to have changed for a while so should give him a ring Quote Link to comment Share on other sites More sharing options...
pschrauber Posted April 9, 2022 Report Share Posted April 9, 2022 (edited) In doubt I would dump the Amal and mount a DellOrto. I did so with my Bultaco and too with the Montesa. You can take the standard DellOrto of your SWM and mount it once to the Armstrong to figure out how well that type will work compared to the original Amal. Most old Amal carbs have the issue of a worn out cylinder for the slide as back in the 80's the material of the body and the slide where of the same material. Thus lead to much friction and worn out both components. Edited April 9, 2022 by pschrauber spelling issues as usual ... 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.