vectradam Posted May 14, 2022 Report Share Posted May 14, 2022 Had a problem with the gears on my Beta Rev 4t 2008 today. The gear change shaft just rotates up and down but nothing appears to be attached to it. .( it definitely isnt the lever just going around on the shaft) Fearing the worst on this one. Does anyone have any ideas Many thanks Quote Link to comment Share on other sites More sharing options...
carl ekblom Posted May 15, 2022 Report Share Posted May 15, 2022 I guess your gearbox is OK. I think it´s the selector mechanism. To examine it, as far as I can remember, you´ll have to remove the clutch basket. Quote Link to comment Share on other sites More sharing options...
pauls320 Posted May 15, 2022 Report Share Posted May 15, 2022 Its not uncommon for the weld to let go on the inner end of the shifter shaft on this model. Easy repair, just remove clutch.cover/clutch and slide out'n reweld. There was an older thread on here. Best of luck Quote Link to comment Share on other sites More sharing options...
vectradam Posted May 19, 2022 Author Report Share Posted May 19, 2022 It was the weld had broken. Now welded up and refitted. Many thanks for your help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.