JeJeBul198 Posted May 20, 2022 Report Share Posted May 20, 2022 is this normal? piston at bottom dead center Quote Link to comment Share on other sites More sharing options...
feetupfun Posted May 20, 2022 Report Share Posted May 20, 2022 Are you asking about the skirt protruding beyond the sleeve in the bottom photo? Or are you asking about the transfer port sleeve hole being partly obscured by the piston? Quote Link to comment Share on other sites More sharing options...
JeJeBul198 Posted May 20, 2022 Author Report Share Posted May 20, 2022 Il y a 11 minutes, feetupfun disait : Are you asking about the skirt protruding beyond the sleeve in the bottom photo? Or are you asking about the transfer port sleeve hole being partly obscured by the piston? Transfert port 1 Quote Link to comment Share on other sites More sharing options...
model80 Posted May 21, 2022 Report Share Posted May 21, 2022 (edited) It should all line up, with the Cylinder Transfer Ports, the Piston Skirts and Cutaways matching. Is that an original piston (Mahle) or a aftermarket replacement? Edited May 21, 2022 by model80 Quote Link to comment Share on other sites More sharing options...
feetupfun Posted May 21, 2022 Report Share Posted May 21, 2022 Does the piston really go that far down at BDC? What does it look like with the piston crown edge level with the bottom of the exhaust port? Also the piston should be in there the other way around, with the short skirt at the rear. On 5/20/2022 at 5:59 PM, JeJeBul198 said: Transfert port 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.