miked Posted February 23, 2006 Report Share Posted February 23, 2006 Hi, has anybody had tuning problems after using a WES exhaust system, if so what settings did you use. My TLR 250F is not running as it was, the exhaust is running very hot, but still has not blued the chromed exhaust, any suggestions. Cheers Miked Quote Link to comment Share on other sites More sharing options...
motomike Posted February 23, 2006 Report Share Posted February 23, 2006 Miked You will probably need to change the carb jetting ? Quote Link to comment Share on other sites More sharing options...
g4321 Posted February 23, 2006 Report Share Posted February 23, 2006 Clean out the carb, clean and oil the air filter, fir a new plug and do a plug chop. Where did you get chrome front pipe? Gordon Quote Link to comment Share on other sites More sharing options...
miked Posted February 23, 2006 Author Report Share Posted February 23, 2006 Cleaned to carb, checked the float level, filter clean and oiled, new plug fitted, new cap fitted, all carb settings standard. Checked TDI and stator resitinance as per book, ok. Has anybody changed jetting if so to what? Gordon, what is a plug chop? Chroming was done in Perth WA on old pipe, came out ok. Ta, Miked Quote Link to comment Share on other sites More sharing options...
g4321 Posted February 24, 2006 Report Share Posted February 24, 2006 Plug chop is when you run bike in top gear near to flat out under load then kill engine and pull in clutch. Looking at the resultant plug colour will tell you if the bike is running weak or rich - or if you are really lucky spot on. Have a look at the following links - I just had a play on Google to find a couple useful ones. http://justkdx.dirtrider.net/printcarbtuning.html http://www.moorescyclesupply.com/techamal.htm A plug chop will only give you information on the main jet size. As you know a TLR aint really used at full throttle much so the needle height and pilot screw setting will be more important. If you still have your original exhaust put that back on to see if it is the WES pipe that is the problem? Quote Link to comment Share on other sites More sharing options...
haposwald Posted March 11, 2006 Report Share Posted March 11, 2006 Was wondering....Where it's possibile to purchase a DEP exhaust.... Or a site for them or WES....Putting it on 1984 HRC RS250ta .....Also looking for aluminium swingarm Thanks to any and all.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.