beta evo silencer repacking

[nickmeredith]

hi all, i have a 2019 beta evo that id like to repack the silencer on but it looks like you need a special tool to undo the screws at the end with, looks like a star drive but with a pin in the middle, could any tell me where i can get 1 from

[peter_steer]

Good evening,

I removed mine with the old bodge with a hammer and a chisel, you could also grind a slot with a dremel .

I then replaced them with some sensible hex heads.

Good luck.

[Glayne]

1 hour ago, nickmeredith said:

hi all, i have a 2019 beta evo that id like to repack the silencer on but it looks like you need a special tool to undo the screws at the end with, looks like a star drive but with a pin in the middle, could any tell me where i can get 1 from

Sounds like a standard security torx here in Canada, not sure where you are?

[nickmeredith]

im in the uk

[nickmeredith]

8 minutes ago, Glayne said:

Sounds like a standard security torx here in Canada, not sure where you are?

Thanks pal , thats exactly what they are , just found a set on amazom for a fiver

[stpauls]

Tool Station, Screwfix. Proper Job.

 

[brianrch]

I just did the same thing. It was easy but I had to buy the tamperproof Torx