dazmo33 Posted October 27, 2022 Report Share Posted October 27, 2022 Few questions if anyone can help please? 1) Gas Gas parts give the three orings on the slave cylinder (1 outside that hold the needle roller, two hydraulic seals inside) as the same. Can that be right? 2) Are friction and/or steel plates interchangeable from old and new models? 3) What significance do the crosses on the standard steel plates have? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
gasgasman280- Posted October 27, 2022 Report Share Posted October 27, 2022 Guessing here. Looks like the new parts have have more slots and cutaways to allow more oil into the clutch so I wouldn't use the old parts even if they are in spec. As for the rest...nfi! 1 Quote Link to comment Share on other sites More sharing options...
faussy Posted October 28, 2022 Report Share Posted October 28, 2022 (edited) What year are the old plates from? They could be different thicknesses, otherwise they should be ok. Judging by the size of the friction pads they look old. Why are you changing plates already if its a 2022? Edited October 28, 2022 by faussy Quote Link to comment Share on other sites More sharing options...
dazmo33 Posted October 28, 2022 Author Report Share Posted October 28, 2022 We have been struggling with the clutch to get a decent bite position and feel for my boy. It also changes during a trial. I stripped it to have a look to see if there was anything obvious and was just comparing to some plates from my older bike. Quote Link to comment Share on other sites More sharing options...
lineaway Posted October 28, 2022 Report Share Posted October 28, 2022 Are you sure its not a bad master cylinder. 1 Quote Link to comment Share on other sites More sharing options...
ossa68 Posted October 28, 2022 Report Share Posted October 28, 2022 https://www.xiu-rdi.eu/proyectosdetalles1.php?newlang=en 1 Quote Link to comment Share on other sites More sharing options...
anotherfive Posted August 14, 2023 Report Share Posted August 14, 2023 I have also been struggling with a 2022 clutch after seven years on a 2015!! I've now tried all three settings with four oils to no avail. Clutch is perfect for first 20 mins then becomes more aggressive. I'm now going to try atf this week. Still unsure what crosses on plates are for. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.