ibgarrow Posted January 25, 2023 Report Share Posted January 25, 2023 Having just been set right on a bike I proposed to buy which was identified by a forum member as being mid-advertised as a 2012 when it was a 2005, can I seek your advice in confirming/not the bike below, which is described as a Beta 250 from 2008, please? I appreciate it isn’t a 4T (presumably the plastics or decals are from another bike) I plan to go to see it Friday, but if it’s a wrong’un, I don’t fancy the two-hour drive… thanks in advance Quote Link to comment Share on other sites More sharing options...
feetupfun Posted January 26, 2023 Report Share Posted January 26, 2023 One way to help know what year a Rev 3 is, is to count the spokes. The wheels changed from 36 spoke to 32 spoke in about 2005. If it was me buying it, I wouldn't care what year model Rev 3 it is. They are all good to ride. Condition would be the important thing. From the photos it is impossible to know if it is a 200, 250 or 270. The 125 had a different exhaust to the one in the photos. 1 1 Quote Link to comment Share on other sites More sharing options...
trailmeisterjoe Posted January 26, 2023 Report Share Posted January 26, 2023 Black coated forks and exhaust protector look like a 2008? https://betausa.com/trials-hisotry/ Joe 1 Quote Link to comment Share on other sites More sharing options...
markparrish Posted January 26, 2023 Report Share Posted January 26, 2023 I had a 2007 that looked very similar but my wheels were plain alloy - I think those black/silver rims came in 2008 and stayed for a few years including the Evo. Of course, they may not be the original rims. Good bikes regardless, if they are well looked after. 1 Quote Link to comment Share on other sites More sharing options...
reggie Posted January 26, 2023 Report Share Posted January 26, 2023 go to the betamotor website next go to the parts finder section and put in the VIN then voila you will have the model year just that simple 1 Quote Link to comment Share on other sites More sharing options...
ibgarrow Posted January 26, 2023 Author Report Share Posted January 26, 2023 Thanks to all above. I travel tomorrow with the expectation that this seems a genuinely-described bike. Will report back. 1 Quote Link to comment Share on other sites More sharing options...
gasgasman280- Posted January 27, 2023 Report Share Posted January 27, 2023 Note that the rear guard is cracked up bigtime and by the looks of things a throwaway Chinese pitbike master cylinder on the front brake. A Beta rev 3 is a good choice as a starter bike as virtually all parts are available ex factory. Quote Link to comment Share on other sites More sharing options...
ibgarrow Posted January 28, 2023 Author Report Share Posted January 28, 2023 After a trip into the roundabouts around Teesside, I’ve brought home what turns out to be an ‘08 Rev3 270 (not the 250 as advertised-will do some research on this later tonight) the rear damper bottom bush is shot. Presumably I replace both the bush and the spherical bearing? Easy-Peasy? as gasgasman280 told me, the front brake lever assembly is wrong. Replacement will cost £180+ ☹️ and the rear mudguard is split, has been plated, but that’s come loose. I gather it’s a 4T version, and as the correct one is over £150, and I’m bound to damage it, I’m proposing to re-rivet the crack and struggle on. one rear plastics bolt has sheared off in situ. I hope I can drill and extract that. Just to keep me busy. comment/advice welcome. 1 Quote Link to comment Share on other sites More sharing options...
PAULIE Posted January 28, 2023 Report Share Posted January 28, 2023 Congrats on your new machine! 1 Quote Link to comment Share on other sites More sharing options...
trailmeisterjoe Posted January 29, 2023 Report Share Posted January 29, 2023 Should be interesting for you to UN-do what is incorrect/broken and make it yours. Joe Quote Link to comment Share on other sites More sharing options...
bishyfishy Posted January 29, 2023 Report Share Posted January 29, 2023 I'd just ride it as it is and find out what doesn't work and fix as you go. If you've never ridden trial before then leave the existing mudguard as likely to snap a brand new one 🙂 1 Quote Link to comment Share on other sites More sharing options...
ibgarrow Posted January 30, 2023 Author Report Share Posted January 30, 2023 (edited) Started refurbishing today. Silencer packing is badly contaminated, so new media on order. had a b*** of a job detaching the rear mudguard, as one screw was mangled, and the retaining captive nut was just spinning in the air box. I’ve got it out, retapped the nut, and araldited it back. Hopefully it holds up. broke a hex key in the impact driver trying to get the bottom bolt out of the rear damper, as the bearing is shot. I resorted to a long bar, and succeeded. Removed the bushes, seals and found the retaining clips *before* resorting to brute force to remove the bearing. Question: to replace the (new) bearing, I’d normally put the bearing in the fridge, warm the bottom of the damper, and hope the cold bearing would slide it with aid of some effort and grease. Is this the way to do it? advice, as always, welcome. Edited January 30, 2023 by ibgarrow Quote Link to comment Share on other sites More sharing options...
PAULIE Posted January 31, 2023 Report Share Posted January 31, 2023 (edited) Just went through a lot of this same stuff on my new bike. It amazes me how people can let their machines go. I have successfully used both a vice and a hydraulic press to install bearings. With a proper sized socket doing the pushing of course. Edited January 31, 2023 by PAULIE 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.