Skidmark Posted March 28, 2023 Report Share Posted March 28, 2023 During my clutch inspection I found two steels that had lips along the outer perimeter on one side that the adjacent friction fits nicely into. These aren’t mentioned anywhere in the manuals I found, do they go in a special location in the stack? The frictions were all within spec so I reassembled as it came apart and flipped the spring washers so the raised area was nestled inside the spring, lowering the effecting preload pressure on the springs. Clutch is a lightswitch, I’m hoping to get more progressiveness in its action…. Thoughts? Skiddy Quote Link to comment Share on other sites More sharing options...
mcman56 Posted March 28, 2023 Report Share Posted March 28, 2023 My 2014 Factory model came with those. The parts list shows them in positions 2 & 4 of 6. There was something else different about the clutch too, maybe the hub. I could never figure out what the additional features were supposed to do. The clutch did not work any better or any worse than any other Beta clutch. plate https://trialworld.es/tienda-trial/en/clutch-trial/2668-beta-evo-factory-steel-clutch-disc.html Quote Link to comment Share on other sites More sharing options...
Skidmark Posted March 28, 2023 Author Report Share Posted March 28, 2023 Mahalo for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.