godzilla Posted October 29, 2023 Report Share Posted October 29, 2023 (edited) I have a 2019 250, which had a small coolant leak, hopefully just the bleed screw washer on the pump cover, it’s the first newer Sherco I’ve had so I’m not totally familiar with them, the info online is quite scant about the rad top up and bleed, the manual has the bleed screw and oil top up as the same thing I think, can someone confirm it’s wrong please? Also is the top up procedure as simple as fill rad oped bleed screw on cover nip to 10nm re top up, is there an overflow for expansion? Edited October 29, 2023 by godzilla Quote Link to comment Share on other sites More sharing options...
Tr1AL Posted October 29, 2023 Report Share Posted October 29, 2023 @godzillaAll the information is on the page you put in your post , just follow the instructions and you are done. Quote Link to comment Share on other sites More sharing options...
Tr1AL Posted October 29, 2023 Report Share Posted October 29, 2023 1 minute ago, Tr1AL said: @godzillaAll the information is on the page you put in your post , just follow the instructions and you are done. Fill the system slowly to avoid trapped air . Quote Link to comment Share on other sites More sharing options...
cascao Posted October 30, 2023 Report Share Posted October 30, 2023 This manual page can't be more wrong No need to remove bash plate Cap C is for gearbox oil. Bolt you need remove is M5 bolt (allen 4) on pump cover Quote Link to comment Share on other sites More sharing options...
godzilla Posted October 30, 2023 Author Report Share Posted October 30, 2023 4 hours ago, cascao said: This manual page can't be more wrong No need to remove bash plate Cap C is for gearbox oil. Bolt you need remove is M5 bolt (allen 4) on pump cover Thanks for the reply’s, I won’t even be removing the bash plate the change the oil let alone the water. I’m surprised Sherco hasn’t corrected it. https://www.sherco.com/wp-content/uploads/SHERCO-MANUEL-TRIAL-ST-Serie-125-250-300-2022.pdf Quote Link to comment Share on other sites More sharing options...
Tr1AL Posted October 30, 2023 Report Share Posted October 30, 2023 @godzillaI am sorry about misleading you , I did not read what the manual page said as I just assumed that some one would have proof read the stuff before it was put out there but of course we live in a world where people do their work when they have a moment when nothing interesting is happening on their camera that also happens to be a phone/laptop nowadays so you cannot trust anything you hear or read. Lesson learnt. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.