dan williams Posted February 13 Report Share Posted February 13 (edited) “There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another theory which states that this has already happened.” Hitchhiker’s Guide to the Galaxy In my never ending quest to improve my Beta (and ignore the fact that I’m the weak link) I’ve been thinking about the generally accepted weakness or at least variable feel of the Beta rear brake. It uses the same master cylinder as the other bikes. The caliper is not particularly different. I can only come up with one big difference between Beta and the other brands. Beta’s brake is on the other side of the swingarm. In itself not significant but the brake hose is roughly twice the length of the other bikes. This makes the Beta twice as sensitive to the effect of hose expansion under pressure. Could something this simple be why Beta rear brakes are not on par with other manufacturers? I feel some research coming.🤔 Edited February 13 by dan williams 1 Quote Link to comment Share on other sites More sharing options...
lineaway Posted February 14 Report Share Posted February 14 Ron Sr. always did Geoff and Ron jr`s Beta`s with smaller hydraulic lines. Quote Link to comment Share on other sites More sharing options...
nhuskys Posted February 14 Report Share Posted February 14 (edited) I'm a rear brake user.... we ride a lot of steep downhills in wet and dry. I also use my rear brake a lot in tight turns. I have a '21 Factory 200 which I did upgrade to an NG FIM rear disc and a '23 Factory 200 with the stock one. The rear brake works as good or better than my previous Gas Gas and Scorpas did. It seems very consistent to me. What do you feel? Edited February 14 by nhuskys Quote Link to comment Share on other sites More sharing options...
mcman56 Posted February 14 Report Share Posted February 14 (edited) The rear brake is the one thing I dislike about Evos. The Beta 4t has the brake on the other side yet has the same weakness. In addition, I found Rev3 rear brakes to work fine. I sometimes wonder if the lack of feel on Evo rear brakes is actually the brake lever (flex?). Or maybe it is the combination of the lever and my small feet (size 9). The picture is more vulnerable but a workable solution. I think the Jitsie lever helps a little also. Early Rev3s had a 2 piston caliper in the back. I did this after replacing all brake components including the disc and trying all available pads. Edited February 14 by mcman56 smaller pic Quote Link to comment Share on other sites More sharing options...
nhuskys Posted February 14 Report Share Posted February 14 I run the Jitsie Race rear lever on my ‘21 and stock lever with an aftermarket rear facing tip on the ‘23. I like the modified stock better. Quote Link to comment Share on other sites More sharing options...
lineaway Posted February 15 Report Share Posted February 15 (edited) I have to agree with Dan. Beta rear brakes have always flat out sucked compared to the other brands. It`s almost like they had an engineer had no desire to make the brake any better than on or off. maybe the later model years have gotten better. I gave up on Beta when the next Gen model never happened. It would be tough to get me off my Montesa. But I just bought a lightly used 2016 250 for my grandson. (Novice rider owned.) Who knows I could be back to Beta by the end of the year. Edited February 15 by lineaway Quote Link to comment Share on other sites More sharing options...
nhuskys Posted February 15 Report Share Posted February 15 It must be because I have newer Factory models and that I'm an old school rear brake dragging woods racer? Quote Link to comment Share on other sites More sharing options...
dan williams Posted February 15 Author Report Share Posted February 15 15 hours ago, lineaway said: Ron Sr. always did Geoff and Ron jr`s Beta`s with smaller hydraulic lines. Yeah I remember that. There were always custom goodies on Ron’s bikes. Including a few Ron specific mods. Always amazed me the stuff Ron Jr. could do especially since he could barely flex his throttle wrist. He’d turn the throttle on by rolling it under his fingers and control power with clutch technique. Quote Link to comment Share on other sites More sharing options...
dan williams Posted February 15 Author Report Share Posted February 15 The stock brake lines are 1/8” J. Juan lines but I haven’t found any specs for the hose. There are ultra-low expansion hydraulic hoses but finding specs is proving difficult. 3 Quote Link to comment Share on other sites More sharing options...
mmcnailer Posted February 17 Report Share Posted February 17 I took the 4 piston caliper off my rev3 2004and went to the 2 piston caliper ...no more rear brake problems...my 16 evo rear brake works fine locks up when I want and drags when I want 1 Quote Link to comment Share on other sites More sharing options...
Reffus Posted February 18 Report Share Posted February 18 On my old 2016 300 Evo, I swapped the master cylinder for an after market one (can't remember the brand) and switched to NG discs and Galfer pads - sooo much better👍 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.