Ash-hurcs Posted June 7 Report Share Posted June 7 I have a 1995 JTX 250 and am having a few issues with the clutch I have removed clutch assembly and cleaned all parts also have checked and both pushrods and bell bearing in between are present I have bled clutch out I have adjusted leaver but still the clutch does not fully engage or disengage I have noticed the small ball bearing in the space cylinder has been pushed back into the cylinder so my question is do i need to replace the cylinder and seals or can I do something else to make it work better ?? Please help if you can it is fully appreciated . thanks in advance Quote Link to comment Share on other sites More sharing options...
lineaway Posted June 12 Report Share Posted June 12 (edited) Was it put back correctly. It only goes together one way. The finger tower has a notch in it and the pressure plate has an aligning mark. Edited June 12 by lineaway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.