2008 sherco 250 barrel enquiry

[Flapper]

Hi all

Have a 2008 250 2t. Looks like pistons been scraping as when I got it the fan had been bodged and has seized up so guess it's been cooked a few times.  

 

After a barrel and piston before I get it shipped off for hopefully a rebuild. 

Does the later barrel and piston fit at all ?? It looks pretty damn close 

I see the exhaust bolts are offset on one I've been looking at and mine are straight up n down which would actually make it easier to fit the pipe 

Here's hoping 

[sectionone]

I would just send it to a replating company. It is done all the time in the MX and Enduro world. Just send the cylinder and a new piston to them and they will send it back like new.

https://langcourt.com/

[Flapper]

Cheers .

Been looking at just the same idea at splat shop. 

Just dreading what else I'm gonna find when I rip it apart 😪

Edit*

Just had taxman tell me he owes me a big wedge so looks like it's stripping time. Yessssss

 

 

 

Edited Tuesday at 07:47 PM by Flapper
Happy taxman wants to pay me dosh yay

[tony27]

On 7/14/2024 at 8:48 AM, Flapper said:

Hi all

Have a 2008 250 2t. Looks like pistons been scraping as when I got it the fan had been bodged and has seized up so guess it's been cooked a few times.  

 

After a barrel and piston before I get it shipped off for hopefully a rebuild. 

Does the later barrel and piston fit at all ?? It looks pretty damn close 

I see the exhaust bolts are offset on one I've been looking at and mine are straight up n down which would actually make it easier to fit the pipe 

Here's hoping 

Trying to remember if it was 09 that the cases changed with the waterways in a different place but basically what I'm saying is that the later cylinders probably don't fit

I had my Jarvis cylinder replated last year, definitely the way to go as you know everything is perfect unlike if you buy secondhand