klewsh Posted March 23, 2006 Report Share Posted March 23, 2006 Does anyone no how to get more power out of an 03 250 with out to much of a cost?? Quote Link to comment Share on other sites More sharing options...
dixie Posted March 23, 2006 Report Share Posted March 23, 2006 Another quick one remove the extra weight from the flywheel,that makes it pick up quicker,if it is allready off and you still need more power buy a fireblade engine Quote Link to comment Share on other sites More sharing options...
hrc1 Posted March 23, 2006 Report Share Posted March 23, 2006 If engine is sound - fit fast throttle, remove flywheel for intant zip. Thinner base gaskets are available too. However 03 engines are softer tuned than 04/05 units. Quote Link to comment Share on other sites More sharing options...
klewsh Posted March 26, 2006 Author Report Share Posted March 26, 2006 kool thanks Quote Link to comment Share on other sites More sharing options...
bob Posted March 27, 2006 Report Share Posted March 27, 2006 there is such a thing as too much power, thats why i went for a 200. Bob Quote Link to comment Share on other sites More sharing options...
dmx84 Posted March 27, 2006 Report Share Posted March 27, 2006 Try and repack your tail pipe, that will give you low end power. When I got mine used I pulled off the whole exhaust system. Had the main pipe vatted to remove carbon buildup, then I burned out the center with a torch & used a wire brush to get the burned crud out. Repacked the muffler and it was real nice afterwards. You can do this for cheap. But this will help the low-end mostly. DMX Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.