bikerpet Posted August 21 Report Share Posted August 21 I'm planning on replacing the sliding bushes in my forks some time in the not too far distant future and am hoping someone can enlighten me about the Cartridge Assembly Tool 080008000 used to hold the left leg end stroke regulator. What is the working end? It looks like it is just a socket key, but what size? Presumably it should be easily replicated with a suitable allen key on an extension. Quote Link to comment Share on other sites More sharing options...
cascao Posted August 31 Report Share Posted August 31 mine was made by welding a nut on a pipe...after I bored nut internals. This tool has two ends because aluminium forks and steel forks are diffrent sizes It is not needed everytime. If you disassemble with an impact hammer, probably will no need to hold internals Quote Link to comment Share on other sites More sharing options...
bikerpet Posted August 31 Author Report Share Posted August 31 2 hours ago, cascao said: mine was made by welding a nut on a pipe...after I bored nut internals. This tool has two ends because aluminium forks and steel forks are diffrent sizes It is not needed everytime. If you disassemble with an impact hammer, probably will no need to hold internals Can you tell me the sizes of the hex (nuts)? That's what I'm missing. Thanks Quote Link to comment Share on other sites More sharing options...
cascao Posted September 7 Report Share Posted September 7 Mine is 22 one side and 19 other side.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.