nick1 Posted 11 hours ago Report Share Posted 11 hours ago (edited) Help me set up the carburetor dellorto phbl 26 bs 1994. Motorcycle Gas Gas 1994, 237cc engine. The old carburetor parameters that were originally when I bought the motorcycle. 35 Pilot Jet 108 Main Jet D36 Needle 50 Slide 60 Choke Jet 350 Float Needle valve At these settings the carburetor is probably leaking. He just doesn't eat. Then I bought a 200 valve from Float Needle and bought a Main Jet in all sizes. I started trying to change the settings, I just changed the Float Needle valve to 200 and Main Jet 122, but it didn’t do anything. It still pours. Could it be a problem with the floats? Their weight is 2.8 grams. Maybe the float chamber I have is 19 mm at the wrong level. What settings are needed for my 237cc engine. Maybe the float chamber level is wrong? Maybe you need more or less? Edited 11 hours ago by nick1 Quote Link to comment Share on other sites More sharing options...
nick1 Posted 11 hours ago Author Report Share Posted 11 hours ago I am writing through Google Translator. If I wrote something wrong, sorry Quote Link to comment Share on other sites More sharing options...
lineaway Posted 8 hours ago Report Share Posted 8 hours ago You are missing the gasket for the float valve/ needle and seat. Quote Link to comment Share on other sites More sharing options...
nick1 Posted 7 hours ago Author Report Share Posted 7 hours ago 20 minutes ago, lineaway said: You are missing the gasket for the float valve/ needle and seat. installed on site with a new gasket Quote Link to comment Share on other sites More sharing options...
nick1 Posted 7 hours ago Author Report Share Posted 7 hours ago 21 minutes ago, lineaway said: You are missing the gasket for the float valve/ needle and seat. Maybe I didn’t understand something, can you mark it in the photo? I am writing through a translator. Maybe I didn't understand you correctly Quote Link to comment Share on other sites More sharing options...
lineaway Posted 7 hours ago Report Share Posted 7 hours ago (edited) That is the correct part. Edited 7 hours ago by lineaway Quote Link to comment Share on other sites More sharing options...
nick1 Posted 4 hours ago Author Report Share Posted 4 hours ago 3 hours ago, lineaway said: That is the correct part. what could be wrong then? what parameters should the float chambers have? 19 mm? Quote Link to comment Share on other sites More sharing options...
lineaway Posted 3 hours ago Report Share Posted 3 hours ago The picture of your float valve in the carb does not have the gasket installed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.