Help me set up the carburetor dellorto phbl 26 bs 1994

[nick1]

Help me set up the carburetor dellorto phbl 26 bs 1994. Motorcycle Gas Gas 1994, 237cc engine. The old carburetor parameters that were originally when I bought the motorcycle.

 

35 Pilot Jet

108 Main Jet

D36 Needle

50 Slide

60 Choke Jet

350 Float Needle valve

 

At these settings the carburetor is probably leaking. He just doesn't eat. Then I bought a 200 valve from Float Needle and bought a Main Jet in all sizes. I started trying to change the settings, I just changed the Float Needle valve to 200 and Main Jet 122, but it didn’t do anything. It still pours. Could it be a problem with the floats? Their weight is 2.8 grams. Maybe the float chamber I have is 19 mm at the wrong level. What settings are needed for my 237cc engine. Maybe the float chamber level is wrong? Maybe you need more or less?

Edited 19 hours ago by nick1

[nick1]

I am writing through Google Translator. If I wrote something wrong, sorry

[lineaway]

You are missing the gasket for the float valve/ needle and seat.

[nick1]

20 minutes ago, lineaway said:

You are missing the gasket for the float valve/ needle and seat.

installed on site with a new gasket

[nick1]

21 minutes ago, lineaway said:

You are missing the gasket for the float valve/ needle and seat.

Maybe I didn’t understand something, can you mark it in the photo? I am writing through a translator. Maybe I didn't understand you correctly

[lineaway]

That is the correct part.

Edited 15 hours ago by lineaway

[nick1]

3 hours ago, lineaway said:

That is the correct part.

what could be wrong then? what parameters should the float chambers have? 19 mm?

[lineaway]

The picture of your float valve in the carb does not have the gasket installed.