LuisMP29 Posted Wednesday at 09:55 AM Report Share Posted Wednesday at 09:55 AM I have a breakdown in the promax brake caliper, which are not sold separately and have the characteristic of using dot 4. Because of this, several scenarios present themselves to me. 1. Get an AVID JUICY clamp that is in good condition and enter dot 4. 2. repair the one I have, but I don't think it will work. 3. Change the entire system of both wheels for shimano. Has anyone had to change the brake system? Quote Link to comment Share on other sites More sharing options...
colin99999 Posted Wednesday at 10:07 PM Report Share Posted Wednesday at 10:07 PM (edited) I’d say replace with the choice of MTB brake system that fits your budget. The front is an easy bolt on swap. From memory you need to feed the hose through the frame and bleed to follow the original rear routing. Clarks, Shimano, Magura, Hope… pick whichever is readily available to you with spare levers offered too. Edited Thursday at 11:40 PM by colin99999 Typo Quote Link to comment Share on other sites More sharing options...
LuisMP29 Posted Thursday at 10:00 AM Author Report Share Posted Thursday at 10:00 AM I think it's going to be the best. These people at OSET were not right when choosing their braking system to give it good continuity in the future. Thanks for your response Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.