gasgasssser Posted April 5, 2006 Report Share Posted April 5, 2006 What oil/fuel ratios is the best mix for a 290 sherco?.I run at 50:1,but i keep hearing different tales.Some say 50 is ok,some say 70 or 80:1 is ok.Whatdo you run yours at,and what oil do you use?? Steve Quote Link to comment Share on other sites More sharing options...
copemech Posted April 5, 2006 Report Share Posted April 5, 2006 80:1 here, Maxima or Yamalube 2-R Quote Link to comment Share on other sites More sharing options...
9.2 ocrehs Posted April 5, 2006 Report Share Posted April 5, 2006 I hear all sorts about 80:1 and such,but it says,clearly,on my Sherco,2%(50:1), and it runs great.Why wouldn't you run the recommended mix? Don't tell me your BS about carbon,that's part of the two-stroke deal;love it or leave it!I think people are only thinking about the burn; what about the bearings? If anything, I'd want more oil to the bearings on a two stroke.In my opinion,they're barely surviving as it is! Quote Link to comment Share on other sites More sharing options...
andy_290 Posted April 5, 2006 Report Share Posted April 5, 2006 (edited) I run mine @ 75:1 (Ipone) Have seen a brand spanker continually oiling it's plug @ 50:1 Edited April 5, 2006 by Andy_290 Quote Link to comment Share on other sites More sharing options...
gasgasssser Posted April 5, 2006 Author Report Share Posted April 5, 2006 steady on fella!! I was asking for peoples opinion not "Bull S***ing . Its a case of more oil,more crap in my opinion. I will try the 75:1(Thanks Andy) Quote Link to comment Share on other sites More sharing options...
bikespace Posted April 5, 2006 Report Share Posted April 5, 2006 I found that mine ran pretty hot on 50:1. I thought I was doing the right thing when I first got it, but it definitely seems happier at around 75:1 Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted April 5, 2006 Report Share Posted April 5, 2006 Alwys ran my Shercos on 75;1 with great results, not the riding though! Quote Link to comment Share on other sites More sharing options...
chipy Posted April 5, 2006 Report Share Posted April 5, 2006 Whats the most commen way of measuring this out? Chip Quote Link to comment Share on other sites More sharing options...
bikespace Posted April 5, 2006 Report Share Posted April 5, 2006 I normally put about 130ml in a 10 litre fuel can. I use baby bottles to measure the oil out, and mark a felt pen line on it for those drunken stupour prep nights with brain fade Quote Link to comment Share on other sites More sharing options...
andy_290 Posted April 5, 2006 Report Share Posted April 5, 2006 I bought a bigish syringe and suck it out of the bottle into the syringe, then I get exact measurements Got another one for brake bleeding too Quote Link to comment Share on other sites More sharing options...
alan bechard Posted April 6, 2006 Report Share Posted April 6, 2006 (edited) Aint they got Ratio Rite cups there? http://www.faster-motocross.com/ratio-rite-cup.html Hmmmm on thinking about it, do you guys buy your gas by the gallon or the liter? Anyway, I would have thought you would have something similar. Edited April 6, 2006 by Alan Bechard Quote Link to comment Share on other sites More sharing options...
9.2 ocrehs Posted April 7, 2006 Report Share Posted April 7, 2006 You're all crazy! Quote Link to comment Share on other sites More sharing options...
stump magnet Posted April 7, 2006 Report Share Posted April 7, 2006 i run 80cc of ipone to 5ltr of super unleaded always have always will, runs superb (06 290). ipone oil bottles have a handy measuring thingy where you squeeze the oil you want into a seperate part of the bottle then pour it into the fuel, has any one seen how much oil a two stroke bottom end collects even at 75-1!! it will be fine unless your going motocrossing! dont worry. Quote Link to comment Share on other sites More sharing options...
ham2 Posted April 7, 2006 Report Share Posted April 7, 2006 Just like ''stumpy'' recommends, I put 75cc of fully synthetic into 5ltrs of optimax--no problems Quote Link to comment Share on other sites More sharing options...
canine Posted April 7, 2006 Report Share Posted April 7, 2006 I cant remember where but i read an article on two stroke fuel mixes and the article said that running too much oil can be as bad as not enough, The theory is that if you run too much oil the engine runs alot hotter and will burn or hole the piston etc.. personally i would run the reccomended mix, which for the 290 is 50:1 i think, two of my friends have 290's and they both run at 50:1 without problems, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.