stump magnet Posted April 10, 2006 Report Share Posted April 10, 2006 who does the real carbon swingarm protectors? how much and are there any pics of them? Quote Link to comment Share on other sites More sharing options...
copemech Posted April 10, 2006 Report Share Posted April 10, 2006 I do, pm me with your e-mail address and I will send a piccy! Quote Link to comment Share on other sites More sharing options...
stump magnet Posted April 11, 2006 Author Report Share Posted April 11, 2006 have pm'd you mate look forward to hearing from you Quote Link to comment Share on other sites More sharing options...
copemech Posted April 13, 2006 Report Share Posted April 13, 2006 (edited) My bloody e-mail will not work to upload the piccys so heres the goods, hope Andy does not get peed for me spamming! Ok fellows, since this topic has once again sparked several inquiries, I shall try to respond to all here. I make these by hand from a flat sheet of the finest carbon fibre material that I can find imported from Japan which has a high finish on both sides of a very hard and clear resin for maximum durability. They are reversible if damaged on the surface. The bike pictured had about 20 trials on it with no noticeable deterioration. The ones provided will be full sized as pictured but may be trimmed or tapered to a smaller or pointier end if desired if you have a belt sander and some 320 grit sandpaper to finish the edges. The pre Edited April 13, 2006 by copemech Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.