chipy Posted April 18, 2006 Author Report Share Posted April 18, 2006 OOOOps now im confused... Quote Link to comment Share on other sites More sharing options...
dixie Posted April 19, 2006 Report Share Posted April 19, 2006 chipy Its really easy just tighten all the bolts up till they shear off and come back half a flat,that should be optimum tightness Really if you dont like the noise of a rattly floating disc ,put some small o rings under the washers then it will still move but not rattle Quote Link to comment Share on other sites More sharing options...
shercoholic Posted April 19, 2006 Report Share Posted April 19, 2006 Disk mounting holes are 17.72mm dia Disk mounting hole bushes are 17.22mm dia So look for approx 0.5mm "float" which will be more at the tyre radius, which you will feel rocking the bike back and forth with the front brake on. With the brake off you should also feel a little side to side play on the disk, which allows for re-alignment as the front end twists during those 180 degree stoppies you will doing soon. Ishy as always summed it up best "...[Chapter six service manual(Honda)], service recomendation, stop ...king with the (EFI) mapping and ride the bugger." Quote Link to comment Share on other sites More sharing options...
chipy Posted April 24, 2006 Author Report Share Posted April 24, 2006 Im not going to do out... C Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.