bilco Posted April 18, 2006 Report Share Posted April 18, 2006 hi. does anyone have a spare flywheel nut for the 156cc fantic engine,or any idea's where i can get one..cheers Quote Link to comment Share on other sites More sharing options...
john.b Posted April 19, 2006 Report Share Posted April 19, 2006 Try Bill Pye from Great Ayton, North Yorkshire on 01642 722378. He deals with Fantic bikes and spares and if he has n't got one I'm sure he will know where to source one from. Quote Link to comment Share on other sites More sharing options...
bilco Posted April 19, 2006 Author Report Share Posted April 19, 2006 hi john. Bill does'nt have one or know of any about,im hoping someone is breaking an engine up,the only other way to go is get something made up, but i'd rather have the proper nut. cheer's. steve. Quote Link to comment Share on other sites More sharing options...
fanticisti Posted April 21, 2006 Report Share Posted April 21, 2006 (edited) Do you have the original fly nut to measure the thread size/pitch, or if not then can you take dims off crankshaft theads? Seem to remember it was fine pitch but large dia? M14 x1.0 but a very narrow nut for its size. Likely a part No.250-44-00-5200 if anyone out there has a cross reference to the sizes. ..Confirmed M14 x 1.0. Will check local metric hardware suppliers to see if available locally. Edited April 24, 2006 by fanticisti Quote Link to comment Share on other sites More sharing options...
bilco Posted April 25, 2006 Author Report Share Posted April 25, 2006 Do you have the original fly nut to measure the thread size/pitch, or if not then can you take dims off crankshaft theads? Seem to remember it was fine pitch but large dia? M14 x1.0 but a very narrow nut for its size. Likely a part No.250-44-00-5200 if anyone out there has a cross reference to the sizes. ..Confirmed M14 x 1.0. Will check local metric hardware suppliers to see if available locally. <{POST_SNAPBACK}> hi. yes i still have the original nut,look's like im going to have to get one made up,as you may know they have to be very tight as it's easy to break the woodruff key on the 200's. thank you for the reply. Quote Link to comment Share on other sites More sharing options...
fanticisti Posted April 26, 2006 Report Share Posted April 26, 2006 Found a supplier of the right size but he wants Quote Link to comment Share on other sites More sharing options...
grib Posted April 26, 2006 Report Share Posted April 26, 2006 Bill Pye might be interested. Quote Link to comment Share on other sites More sharing options...
fanticisti Posted April 27, 2006 Report Share Posted April 27, 2006 I dont know if Bill Pye reads this Forum , but he should as he gets plenty of free press. Quote Link to comment Share on other sites More sharing options...
bilco Posted April 27, 2006 Author Report Share Posted April 27, 2006 Found a supplier of the right size but he wants Quote Link to comment Share on other sites More sharing options...
lee harris Posted June 21, 2006 Report Share Posted June 21, 2006 Hi Steve, was out of the country so the nut went in the post today. see you in september at the dartmoor? lee Quote Link to comment Share on other sites More sharing options...
bilco Posted June 23, 2006 Author Report Share Posted June 23, 2006 Hi Steve, was out of the country so the nut went in the post today. see you in september at the dartmoor?lee hi lee. ok cheer's mate. I thought my dead head of a post man might of posted it to the wrong house again. steve. Quote Link to comment Share on other sites More sharing options...
bilco Posted June 26, 2006 Author Report Share Posted June 26, 2006 Hi Steve, was out of the country so the nut went in the post today. see you in september at the dartmoor? lee hi lee. ok cheer's mate. I thought my dead head of a post man might of posted it to the wrong house again. steve. Hi Lee. received nut today,perfect job, thank's very much lee. steve. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.