sherco 125 Posted May 31, 2006 Report Share Posted May 31, 2006 i had a fall on my sherco and snaped the braket on my front brake cylinder do any of you know how i can fix it or will i need to buy a new one and where would be the cheapest?? any help would be appreciated Quote Link to comment Share on other sites More sharing options...
essex rider Posted May 31, 2006 Report Share Posted May 31, 2006 haven trialsport have master cylinders and im sure most other places do as well I dont think it could be fixed?? Next time put it on more loosely so is can slide under pressure Quote Link to comment Share on other sites More sharing options...
sherco 125 Posted May 31, 2006 Author Report Share Posted May 31, 2006 it was on loose it got twisted in a log , do you think ally welding would do it?? Quote Link to comment Share on other sites More sharing options...
dman Posted May 31, 2006 Report Share Posted May 31, 2006 we gasgas folk wouldn't know about sherco parts... Quote Link to comment Share on other sites More sharing options...
alan bechard Posted May 31, 2006 Report Share Posted May 31, 2006 I doubt that one would be effectively repairable by welding. Might be worth a try, but I would be concerned of deforming the bore. Quote Link to comment Share on other sites More sharing options...
kevin j Posted June 1, 2006 Report Share Posted June 1, 2006 I had one welded, the bracket ear, somewhat away from the bore. It worked ok for a while, but only reason I did it was to buy time to find another one. Was a 96 and hard to get parts. Ended up with a Pro takeoff from Mizell as the permanent fix. If you need to, I'd have it welded, but only as a short term fix. Belly up to the bar, spend the $US100+ and figure it's cheaper then MX rebuilding engines. k Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.