lee Posted June 8, 2006 Report Share Posted June 8, 2006 Hi ive been noticing the air box on my 06 pro is getting loads of mud and water in it . ive put some silicone on it but i dont want to go over board with it has any one got any tips for me Quote Link to comment Share on other sites More sharing options...
lewis_gasgas Posted June 8, 2006 Report Share Posted June 8, 2006 Do you know where its getting in ? Have you got one of those Wider mud flaps for your gasser if not i advise you get one. Quote Link to comment Share on other sites More sharing options...
telecat Posted June 8, 2006 Report Share Posted June 8, 2006 The usual mods are to block the two side vents and also the "drain" hole at the bottom of the airbox. We also bought another Filter which is supposed to be an improvement over the Gas Gas item. We haven't done these as the bike seemed to be ok without them. Quote Link to comment Share on other sites More sharing options...
lee Posted June 11, 2006 Author Report Share Posted June 11, 2006 lewis dirt and water seems to be coming in at the wide slot right at the top do you think i would get away with a bit of sponge in there or would it resteict the air flow to much can i get wider flap from gasgas uk. Telecat ill look in to thoes filters the one i have in a twin air i was told its the best on market can you tell me make of the one you have and ill give it a go cheers boys Quote Link to comment Share on other sites More sharing options...
lewis_gasgas Posted June 11, 2006 Report Share Posted June 11, 2006 Is there not a plastic flap over that lid when you open it up Lee ? Ive got one on mine il take a pic if you dont know which bit i mean , mine seems to collect most of the crap before going in and i very rarely have to clean out my airbox. There should be a seal around that top lid as well like a rubber tube all the way round which seals it. And yeah you can get the wider flap from gas gas uk its worth it anyway cos it covers your shock as well so you dont get crap down there. Quote Link to comment Share on other sites More sharing options...
lee Posted June 13, 2006 Author Report Share Posted June 13, 2006 thanks ill check for plastic flap and try sponge. ill get back to you Quote Link to comment Share on other sites More sharing options...
cdn280 Posted June 16, 2006 Report Share Posted June 16, 2006 Do you know where its getting in ? Have you got one of those Wider mud flaps for your gasser if not i advise you get one. <{POST_SNAPBACK}> Does someone have a pic of the wider flap in place, and yes, please advise where I can get one. Thanks, Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.