Jump to content

Parts For Sherco


sherco 125
 Share

Recommended Posts

 

The 125 is a very sweet little bike, rode two club events on it just for the fun factor, best 125 I have ridden by far.

Got the upgrade start kit for the 3.2 today, so spent all day fitting that and doing some mod's, **** canned the rear brake res, and replaced with the clear tube, mounted the new coil in the same place the ign module was mounted (down frame right side of cylinder head, then made a bracket and mounted the ign module under the carb like the 06's, bike is very easy to start, should be easy enough for the limp knee club now.

Purchased a new head pipe to take in and get Ceramic coated, but that will take a week before I have that on for testing.

The 125 may get a stay of execution some local kid really wants it bad, and now the 3.2 is easy enough for the majority to start, should sell ok and just buy a 06/7 3.2.

Cope, the V-mar clamp was measured up and made for the Sherco.

Link to comment
Share on other sites

 
 
 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...