Jump to content

? For Lee Harris


axulsuv
 Share

Recommended Posts

 

Hi Glenn, I run stock champion L82C on all my 240s. Also the 243 engined bike runs this plug. The gap I set at 0,55mm. It works ok but I jet down to 95 or 96 on the main as i dont run on the road! ( I also use ELF full synthetic oil at 80:1 mix, which I also use on my GG300)

I have got one 240 fitted with a 26mm carb from a 300. it uses stock 300 jetting and seems to run ok on that! I think it also gives a little extra performance on the 240 engine. The 243 engined bike has a std 240 carb but is zippier (?) than the 240s as I have changed the ports and timing a little!

I have WES silencers fitted to all my fantics. They are the best and I would recommend them to all, especially considering that the original can from fantic must be full of S

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...